BLUETOOTH CONNECTIVITY
Bluetooth Hardware
The Feniex 4200 has the option of being controlled
via a smart phone or tablet. To enable this feature you
will require the Feniex in-line Bluetooth module (part #:
C-4200WB-AD for Android Bluetooth; C-4200WB-AP for
Apple Bluetooth). Follow the installation instructions below
to pair the 4200 with a smart phone or tablet.
1)
Connect the provided RJ45 cable exiting the 4200
power supply to one end of the BT module.
2)
Connect the other end to the 4200 controller and follow
the marking on the Bluetooth unit for proper connectivity.
Follow instructions on page 15: “4200 App Requirements”
and “Bluetooth Software” to complete Bluetooth
installation.
3)
Upload software to your handheld device.
• To download for apple devices, go to the App
Store.
• To download for android devices, visit
the Feniex website at:
http://www.feniex.
com/s-4200
*The app is not yet available on Google Play
4)
Turn Bluetooth on using handheld device.
5)
Press and hold pairing switch button on
Feniex Bluetooth device for 3 seconds.
6)
In the 4200 app, select “connect” in the upper right
corner.
7)
Select “Search for device” for Android or “Scan” for
Apple
8)
Enter password:
• For android devices, select Feniex 4200 and enter
password: 1111.
• For apple devices, select Feniex 4200 and choose
enter 8 digit password: 11111111
9)
When the app is successfully paired with the Bluetooth
module, the circle next to “connect” changes from red to
green.
4200 App Requirements:
Android
App minimum requirements are the following:
• Android 2.2 or higher
• Bluetooth 2.0 EDR with SPP support
The app should be compatible with most phones made in
2011 or after.
Apple
App should work on the following devices:
• iPhone 5 or newer
• iPad Air or newer
• iPod Touch 5th Gen or newer
• iPad 3rd Gen or newer
Devices must have Bluetooth 4.0 and iOS 6.0 software or
newer.
TM
FENIEX //
INSTRUCTION MANUAL
WEB //
www.feniex.com
14
