background image

1.1.8  General safety instruction

CAUTION:
Carefully read the operator manual
before operating the machine. See all
instructions and safety rules when
operating or doing maintenance.

GUID-FE6A41D4-536F-4C0D-BE60-FA0CCDEEB171-high.jpg [High]

Fig. 4  

Do not start the engine until the area is free of

personnel. Honk the horn two times to tell others.

This will help prevent personal injury because

machine movement can occur.
Know the width of the equipment to keep the

correct clearance when operating near fences or

near boundary blockage.
Wear a hard hat, protective glasses, and other

protective equipment, as necessary.
Do not wear loose clothing or jewelry that can

catch on controls or on other parts of the machine.
Make sure that all protective guards and all covers

are attached in position on the machine.

GUID-6CB742A7-222E-47ED-9806-1887BFD0CF24-high.jpg [High]

Fig. 5  

Keep the machine free from unwanted material. Remove unwanted material, oil, tools, and other items

from the deck, from walkways, and from steps.
Make sure lunch boxes, tools, and other loose items that are not a part of the machine are attached.
Know the applicable work location hand signals and the personnel that are approved to give the hand

signals. Get hand signals from one person only.
Do not put maintenance fluids into glass containers. Drain all liquids into an approved container.
Discard all drained fluids and discard all filters. Refer to local regulations.
Use all cleaning solutions with precaution.
Record all necessary repairs.
Do not let untrained or not approved personnel on the machine.
Do not smoke when doing work an air conditioner. Also, if there is refrigerant gas around, do not smoke.

Breathing the fumes that are released from a flame that touches air conditioner refrigerant can cause

bodily injury or death.
Breathing gas from air conditioner refrigerant through a lighted cigarette can cause bodily injury or death.
Do the following before completing maintenance unless receiving other instructions:
• Parked the machine on level ground.
• Lower the implements to the ground.
• Park the machine.

GUID-5D629BA7-D659-48B8-A7B0-3B99F135B7BA [V1]

1. General

1-6

Rubber Track Tractor

79037495A

Find manuals at https://best-manuals.com

Summary of Contents for 938 Vario MT




















































Reviews: