![background image](http://html1.mh-extra.com/html/fendt/938-vario-mt/938-vario-mt_workshop-service-manual_4002006030.webp)
1.6.2.3 Check for leakages
Find any leakage points (fuel, oil, coolant) and
eliminate them as soon as possible.
The coolant pump is provided with a telltale hole
on the left side. This hole must not be blocked. If
coolant drops out of the hole, the coolant pump
must immediately be repaired.
There may be a slight leakage on a new pump
before it has been run in.
GUID-BE29A0E3-FA07-4D3B-89C4-CF5AF403CF24-high.eps [High]
Fig. 22
1.6.3 Maintenance to be made weekly or at 100 hours interval
1.6.3.1 Clean cooling system (from outside)
See also the instructions of the machine manufacturer.
Procedure
1.
Check and clean the outside of the radiator from time to time.
2.
Use compressed air or water spray to remove dirt and impurities.
• Avoid too high a pressure.
• The direction of the air or water spray must be against normal air flow.
1.6.3.2 Examine the condition of the belts
The engine has a spring loaded belt tensioner and the belt is of V-ribbed type. The tensioner tightens the
belt automatically during the operation.
See also the instructions of the machine manufacturer.
DANGER: The engine has parts that move.
Injury to persons.
Make sure that the engine cannot start during a belt replacement. Before you start,
disconnect the battery.
GUID-DDCF3FAD-6F66-4A7C-815E-C30E98A05EDE [V1]
[V]
GUID-904A5CAB-B87C-4043-B933-426C86EA19D5 [V2]
GUID-EF8ADE3E-F227-4C1D-8961-3D1B127AFE45 [V2]
1. General
Rubber Track Tractor
1-27
79037495A