32
GLOBAL SETTINGS: I/O SETTINGS (CONTINUED)
Touch EXP/CTRL to access several parameter-control options for expression pedal use and the rear-panel AMP CTRL jack, including:
•
EXP 1/2 POLARITY:
For reversing expression pedal functionality to accommodate various external expression pedals.
Default setting is NORMAL; select REVERSE for pedals requiring reverse functionality.
•
TOE SWITCH:
Select LATCHING (default) or MOMENTARY operation based on switch type in pedal being used.
•
AMP CTRL 1/2 POLARITY:
For reversing rear-panel AMP CTRL functionality to synchronize on/off status with external
amplifier function. Default setting is NORMAL.
Tone Master PRO offers two USB audio recording modes—standard recording and reamp recording. Global Settings offers an
option for configuring Tone Master PRO to route dry audio tracks from a DAW through the instrument or mic/line channels for
post-processing (reamping):
• REAMP MODE:
Select ON when reamping dry tracks while recording using a DAW. Default setting is OFF.
Note that reamp mode is a special mode that mutes the rear-panel instrument and mic/line input jacks. Tone Master PRO will
return to standard recording mode when powering off and back on again.
The Global Settings MIDI section provides comprehensive control of MIDI parameters including:
•
MIDI OUT:
For setting rear-panel MIDI output jack functionality; options include:
OUT:
Default setting; only MIDI commands generated by Tone Master PRO are sent to rear-panel MIDI output jack.
THRU:
Only MIDI commands received at the rear-panel MIDI input jack are sent to rear-panel MIDI output jack.
MERGE:
All received and generated MIDI commands are sent to rear-panel MIDI output jack.
•
RECEIVE CHANNEL:
Select a MIDI-receive channel from the drop-down menu; options include channels 1-16 or OMNI
(default mode; all channels). Tone Master PRO will only respond to MIDI commands on the selected MIDI channel.
• SEND MIDI CLOCK:
Select to send MIDI clock to rear-panel MIDI output jack. When ON, Tone Master PRO sets tempo
for external devices that respond to MIDI clock. Default setting is OFF.
• RECEIVE MIDI CLOCK:
Select to receive MIDI clock from external devices that send MIDI clock. When ON, Tone Master
PRO tempo is set by external MIDI clock. Default setting is OFF.
• RECEIVE MIDI PRESET CHANGE:
Select to receive MIDI preset changes from external devices. When ON, Tone Master
PRO responds to received MIDI preset changes. Default setting is ON.
Touch Footswitch at the bottom of the Global Settings menu to access a variety of pre-configured footswitch layouts for both
Preset and/or Effects modes. This is a global selection that affects footswitch operation in PRESETS, SONGS and SETLISTS
modes. The user can toggle between Preset and Effects modes with the FS MODE footswitch. Options include:
•
FS MODE PRESETS:
View six presets (default) or three effects over three presets assigned to the middle six footswitches.
• FS MODE EFFECTS:
View six (default) or eight effects footswitches. When viewing six effects, the bank up and down
footswitches remain available at far left. When viewing eight effects, the bank and down footswitches become two
additional effects footswitches. The FS MODE/LOOPER and TAP TEMPO/TUNER footswitches at far right remain
available in both layouts.
