9
COL
OUR
INDIC
A
TION
MENU FEA
TURE
HO
W T
O A
CCESS
S
AFE CLEANING
MODE
This feature allows you to clean your control and
shower without turning on your shower during
cleaning.
PRESS & HOLD
the control for 5 seconds until the GREEN light appears, then
release.
This will disable the control for 45 seconds to allow the control to be cleaned
without turning on.
To cancel, press the control again.
DIA
GNOS
TIC TES
T
This feature will run a series of diagnostic checks
with lights indicating if your control is OK or
malfunctioning.
Please see T
roubleshooting page on the
Smartflow Install Guide booklet if error occurs or
contact Felton T
echnical T
eam at 0800 743 358
PRESS & HOLD
the control for 18 seconds until ORANGE light appears,
then release.
A series of lights will flash to indicate which stage the diagnostic is checking.
To cancel, press control again
.
COL
OUR INDIC
A
TOR
RED LIGHT
V
alve is hot
GREEN LIGHT
V
alve is off
BL
UE LIGHT
V
alve is cold
LIGHT OFF
System check complete
THE FUNCTIONS BEL
O
W ARE ONL
Y AD
JUS
TABLE FOR
1 HOUR
AFTER INITIA
TION
CONSUL
T FEL
T
ON RECOMMENDED INS
TALLER UPON INS
TALLA
TION
MAXIMUM
TEMPERA
TURE
This feature allows you to adjust to your desired
maximum temperature to avoid accidental scalding
from the elderly and children.
Maximum temperature on default is 45°C
PRESS & HOLD
until light starts flashing WHITE.
R
elease immediately to access.
TURN
to adjust desired maximum temperature.
PRESS
again to save maximum temperature.
Maximum default temperature is 45ºC.
THERMAL
DISINFECTION
This feature flushes out the pipes at the hottest
temperature your system will allow
. this will clean
through any limescale and clear any potential
bacteria.
Note:
If your thermal disinfection indicates a red light at the
end of the disinfection, your system has not provided hot
water greater than 55ºC. This can be ignored as it does not
affect the function of the thermal disinfection process.
A
TTENTION: RISK OF SCALDING
PRESS & HOLD
until for appro
x 20 sec until light starts flashing RED
.
Release immediately to access.
Flashing RED:
Thermal disinfection flushes out hot water
.
A
utomatic stop after 2 minutes. RED flashes.
Press again to finish thermal disinfection.
To stop disinfection during cycle:
PRESS ONCE.
RES
TORE
FA
CT
OR
Y SETTINGS
This restores all factory settings back to its original
default setting ex
cept for flow memory.
PRESS & HOLD
until light starts flashing BL
UE.
Release immediately to access.
Flashing BL
UE twice:
Factory setting is restored.
MAXIMUM W
A
TER
FL
O
W TIME
To save water at home, this feature allows you to
switch the unit off after 5 seconds to 30 minutes
during shower
.
PRESS & HOLD
until light starts flashing PINK.
Release immediately to access.
PRESS
to set desired water flow time
Flashing PINK twice:
Setting is saved.
HY
GIENE
FUNCTION
This feature is used for setting up the shower to
turn on and regularly flush the system through.
The complete flush will automatically stop after 2
minutes.
Note:
If your thermal disinfection indicates a red light at the
end of the disinfection, your system has not provided hot
water greater than 55ºC. This can be ignored as it does not
affect the function of the thermal disinfection process.
PRESS & HOLD
until light starts flashing YELL
O
W
.
Release immediately to access.
PRESS ONCE
to adjust interval flushing at the number of flashes.
Flashing YELL
O
W twice:
Setting is saved.
FLA
SHING
1
2
3
4
5
TIME
1 day
2
days
3
days
7
days
Inactive
ADV
ANCED ACTIV
ATION SET UP
DEF
A
UL
T
DEF
A
UL
T
FLA
SHING
1
2
3
4
5
6
7
8
9
10
11
12
TIME
5
sec
8
sec
10
sec
15
sec
20
sec
30
sec
45
sec
1 min
5
min
15
min
30
min
Open