Felt Bicycle Owner'S Manual Download Page 21

36

37

  MAXIMUM WEIGHT LIMIT

RIDER

LUGGAGE*

TOTAL

lbs / kg

lbs / kg

lbs / kg

300 / 136

5 /2.3

305 / 138

* Seat Bag Only

Front suspension frames manufactured with 

original equipment seat stay and dropout 

rack mounts only

300 / 136

55 / 25

355 / 161

All Mountain

CONDITION 4

  Bikes designed for riding Conditions 1, 2, and 3, plus rough 
technical areas, moderately sized obstacles, and small jumps.

 INTENDED

 For trail and uphill riding. All-Mountain bicycles 

are: (1) more heavy duty than cross country bikes, but less 
heavy duty than Freeride bikes, (2) lighter and more nimble 
than Freeride bikes,  

(3) heavier and have more suspension travel than a cross country bike, allowing 
them to be ridden in more difficult terrain, over larger obstacles and moderate 
jumps, (4) intermediate in suspension travel and use components that fit the 
intermediate intended use, (5) cover a fairly wide range of intended use, and 
within this range are models that are more or less heavy duty. Talk to your retailer 
about your needs and these models. 

  NOT INTENDED

 For use in extreme forms of jumping/riding such as hardcore 

mountain, Freeriding, Downhill, North Shore, Dirt Jumping, Hucking etc. No large 
drop offs, jumps or launches (wooden structures, dirt embankments) requiring 
long suspension travel or heavy duty components; and no spending time in the 
air landing hard and hammering through obstacles.

  TRADE OFF 

All-Mountain bikes are more rugged than cross country bikes, 

for riding more difficult terrain. All-Mountain bikes are heavier and harder to ride 
uphill than cross country bikes. All-Mountain bikes are lighter, more nimble and 
easier to ride uphill than Freeride bikes. All-Mountain bikes are not as rugged as 
Freeride bikes and must not be used for more extreme riding and terrain. 

  MAXIMUM WEIGHT LIMIT

RIDER

LUGGAGE*

TOTAL

lbs / kg

lbs / kg

lbs / kg

300 / 136

5 / 2.3

305 / 138

* Seat Bag Only

General Purpose Riding

CONDITION 2 

  Bikes designed for riding Condition 1, plus smooth gravel 
roads and improved trails with moderate grades where the 
tires do not lose ground contact.

 INTENDED

 For paved roads, gravel or dirt roads that are in 

good condition, and bike paths.

 

  NOT INTENDED 

For off-road or mountain bike use, or for 

any kind of jumping.  Some of these bikes have suspension 

features, but these features are designed to add comfort, not off-road capability. 
Some come with relatively wide tires that are well suited to gravel or dirt paths. 
Some come with relatively narrow tires that are best suited to faster riding on 
pavement. If you ride on gravel or dirt paths, carry heavier loads or want more 
tire durability talk to your dealer about wider tires. 

  MAXIMUM WEIGHT LIMIT

RIDER

LUGGAGE

TOTAL

lbs / kg

lbs / kg

lbs / kg

300 / 136

30 / 14

285 / 129

for Touring or Trekking

300 / 136

55 / 25

355 / 161

Cross-Country, Marathon, Hardtails

CONDITION 3

  Bikes designed for riding Conditions 1 and 2, plus rough 
trails, small obstacles, and smooth technical areas, including 
areas where momentary loss of tire contact with the ground 
may occur. NOT jumping. All mountain bikes without rear 
suspension are Condition 3, and so are some lightweight rear 
suspension models. 

 INTENDED

 For cross-country riding and racing which ranges from mild to 

aggressive over intermediate terrain (e.g., hilly with small obstacles like roots, 
rocks, loose surfaces and hard pack and depressions). Cross-country and 
marathon equipment (tires, shocks, frames, drive trains) are light-weight, favoring 
nimble speed over brute force. Suspension travel is relatively short since the bike 
is intended to move quickly on the ground.

  NOT INTENDED 

For Hardcore Freeriding, Extreme Downhill, Dirt Jumping, 

Slopestyle, or very aggressive or extreme riding.

 

No spending time in the air 

landing hard and hammering through obstacles.

  TRADE OFF 

Cross-Country bikes are lighter, faster to ride uphill, and more 

nimble than All-Mountain bikes. Cross-Country and Marathon bikes trade off 
some ruggedness for pedaling efficiency and uphill speed.

 

Summary of Contents for Bicycle































Reviews: