2
CAPABILITIES
ENGLISH
Model HD-10Cs
KEY
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
Active
Not Active
I. Control Switch and
Indicator
Lights
I 1.
Auto-On
(green)
O 2.
OFF
R 3.
Reverse
4.
Overheat
(red)
5.
SafeSense
®
(yellow)
A. SafeSense
®
Technology
B. See safety
instructions
below
C. Paper entry
D. Waste opening
E. Mesh basket
F. Disconnect power switch
1. OFF
2.
ON
G. Handle
H. SafeSense
®
override switch
Will shred:
Paper, small paper clips, credit cards and staples
Will not shred:
CD/DVDs, Continuous forms, adhesive labels, transparencies,
newspaper, cardboard, large paper clips, laminates or plastic other than noted above
Paper shred size:
Cross-Cut ............................................................................................4mm x 50mm
Maximum:
Sheets per pass ..................................................................................................10*
Cards per pass ....................................................................................................... 1
Paper width ..................................................................................................230mm
* A4 (70g), paper at 220-240V, 50 Hz, 1.7Amps; heavier paper, humidity or other than rated
voltage may reduce capacity. Maximum recommended daily usage rates: 100 sheets;
5 credit cards.
10 sheets per pass to avoid jams.
Fellowes SafeSense
®
shredders are designed to be operated in home and office
environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius)
and 40 – 80% relative humidity.
t 0QFSBUJPONBJOUFOBODFBOETFSWJDFSFRVJSFNFOUTBSFDPWFSFEJO
the instruction manual. Read the entire instruction manual before
operating shredders.
t ,FFQBXBZGSPNDIJMESFOBOEQFUT,FFQIBOETBXBZGSPNQBQFS
entry. Always set to off or unplug when not in use.
t ,FFQGPSFJHOPCKFDUToHMPWFTKFXFMSZDMPUIJOHIBJSFUDoBXBZ
from shredder openings. If object enters top opening, switch to
Reverse (R) to back out object.
t
Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
t %POPUVTFJGEBNBHFEPSEFGFDUJWF%POPUEJTBTTFNCMFTISFEEFS
Do not place near or over heat source or water.
t 5IJTTISFEEFSIBTB%JTDPOOFDU1PXFS4XJUDI 'UIBUNVTUCFJOUIF0/ *
position to operate shredder. In case of an emergency move switch to OFF (O)
position. This action will stop shredder immediately.
t "WPJEUPVDIJOHFYQPTFEDVUUJOHCMBEFTVOEFSTISFEEFSIFBE
t 4ISFEEFSNVTUCFQMVHHFEJOUPBXBMMPVUMFUPSTPDLFUPGUIFWPMUBHFBOE
amperage designated on the label. The outlet or socket must be installed
OFBSUIFFRVJQNFOUBOEFBTJMZBDDFTTJCMF&OFSHZ
converters, transformers, or
extension cords should not be used with this product.
t '*3&)";"3%o%P/05TISFEHSFFUJOHDBSETXJUITPVOEDIJQTPSCBUUFSJFT
t 'PSJOEPPSVTFPOMZ
t 6OQMVHTISFEEFSCFGPSFDMFBOJOHPSTFSWJDJOH
B.
D.
E.
G.
F.
H.
I.
C.
A.
Place head on basket
as shown:
Disconnect power switch
must be in ON ( I )
position to operate
shredder.
HD-10
C
s
