background image

6

TROUBLESHOOTING

STORAGE & CLEANING

Problem

Possible cause

Solution

No ‘power on’ lamp (red LED)

Machine not switched on

Switch on machine at the side and at the 

wall socket

No ‘ready’ lamp after a long 

period (green LED)

Machine is in a hot or humid area

Move the machine to a cooler and dry area

Pouch does not completely seal 

the item

Item may be too thick to laminate

Check pass through thickness is correctly 

selected and pass through again

Pouch has waves or bubbles

Temperature setting may be 

incorrect

Check pouch thickness is correctly selected 

and pass through again

Pouch is lost in the machine

Pouch is jammed

Press release lever and pull out the item 

by hand

Jamming

Pouch was used ‘open end’ first
Pouch was not centered on entry
Pouch was not straight upon entry
Empty pouch was used

Pouch is damaged after lamina-

tion

Damaged rollers or adhesive on 

rollers

Pass cleaning sheets through the machine 

to test and clean rollers

PRODUCT REGISTRATION / WORLDWIDE WARRANTY

Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp 

cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can be purchased for use with 

the machine. When the machine is warm – run the sheets through the machine to clean any residue off the rollers. For 

optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet 

order code #5320603).

Thank you for purchasing a Fellowes product. Please visit  www.fellowes.com/register to register your product and 

benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the 

rear side or underside of the machine. Fellowes warrants all parts of the laminator to be free of defects in material and 

workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during 

warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the 

defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. Any implied warranty, 

including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate 

warranty period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to 

this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. 

The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions 

or conditions may be required by local law. For more details or to obtain services under this warranty, please contact 

Fellowes or your dealer.

407534C M1-95.indd   6

4/23/13   1:12 PM

Summary of Contents for L80-95















Reviews: