175
125
80
100
7
5
3
4
ENGLISH
CAPABILITIES
IMPORTANT SAFETY INSTRUCTIONS — Please Read Before Using!
• The socket-outlet must be installed near the equipment
and be easily accessible.
• To prevent electrical shock, do NOT use laminator close to water
and do NOT spill water on laminator, electric cord, or wall socket.
• Do not leave electric cord in contact with a warm surface.
• Do not leave electric cord hanging from a cupboard or shelf.
• Do not use laminator if electric cord is damaged.
• Do not laminate metal objects.
• Only use pouches specifically designed for the lamination setting you intend to use.
• Always supervise children during laminator operation.
• Keep pets away from laminator while in use.
• Switch off and unplug laminator when not in use.
• Only open the laminator as explained under “Maintenance”. Do not open or
attempt to repair in any other way, as this could result in electric shock and will
void your warranty. Contact Customer Service if you have questions. Please note
the warranty does not apply in cases of abuse, mishandling or unauthorized repair.
• Please be careful of sharp edges and corners and residual heat when opening
the laminator.
2
Pouch Thickness
3-7 mil
Estimated Heat-Up Time
4 Minutes
Approximate Cool-Down Time
60 Minutes
Lamination Speed
18”/Minute
Maximum Width
12.5” mm
Voltage
120V
Frequency
60 Hz
Laminating capacity – 3-7 mil hot laminating pouches
Up to 12.5”
1000 Watt
Dimensions: 21
7
/
8
” x 9
5
/
8
” x 4
3
/
4
”
Max document thickness
1
/
32
”
IMPORTANT SAFETY INFORMATION
This laminator is equipped with an Auto shut-off function. It will turn the laminator into
stand-by mode, if it has not been used for over 60 minutes. To switch the laminator
back on, simply press the stand-by button at the left of the front operating panel.
During lamination, the direction of the pouch can be reversed, if you are unsure about
the progress of the lamination. To do so, press down the reverse key. This will eject
the pouch back at the front entry.
LED Interface Key
Stand By
Open
Left
Enter
Up
Right
Down Reverse
LED Panel
cold 3
4 5
7 jam wait rev
Active Cooling System
Discrete carry
handles at side
Temperature controlled
release trigger for lid
Support Shelf on entry to
guide laminate path
HeatGuard Technology™ double-walled
insulation keeps heat inside
Opening lid to clean
laminating mechanism
LED Interface for
user guidance
