Page 7
KataEX2-FF
Assembly
Step #8: make any necessary adjustments
There are four types of swivel and tilt tension adjustments:
1. Monitor tilt adjustment
— Use the 4mm end of the dual Allen key
to loosen the screw on the side of the VESA mount to change monitor tilt angle. Tighten the screw to hold the angle.
2. Monitor swivel adjustment
— Use the 4mm end of the dual Allen key
to adjust the underside screw behind the VESA mount for the desired ease of monitor rotation.
3. Head adapter swivel adjustment
— Use the 4mm end of the dual Allen key
to adjust the underside screw at the end of the outer fixed arm for the desired ease of head adapter rotation. In effect,
this is the same as the monitor swivel adjustment.
4. Fixed arm swivel adjustments
— Use the 4mm end of the dual Allen key
to adjust the underside screw at the end of the arm stem or end of the inner fixed arm for the desired ease of rotation of the
two fixed arms for each monitor.
behind
VESA plate
1
4
4
monitors
not shown
2
3
outer
fixed arm
inner
fixed arm
