Felker FRS-30, Operating Instructions And Parts List Manual

Page: 11 / 64

11
MODEL FRS 30 FRS 38 FRS 51
Power - HP 1.5 1.5 2
Supply voltage - Vac 115 115 230
Supply frequency - Hz 60 60 60
Phase 1 1 1
Full load amps - A 14.4 14.4 8.3
Blade motor - rpm 3400 3400 1700
Blade capacity - in. (mm) 10 (250) 10 (250) 14 (350)
Arbor size - in. (mm) 5/8 (15.9) 5/8 (15.9) 1 (25.4)
Length of Cut - in. (mm) 30 (750) 38 (950) 51 (130)
Depth of Cut at 90° - in. (mm) 2.6 (65) 2.6 (65) 4.1 (105)
Depth of Cut at 45° - in. (mm) 1.2 (30) 1.2 (30) 2.4 (60)
Cutting table 36.5 x 17.3 44.5 x 17.3 60 x 22.5
L x W - in. (mm) (930 x 440) (1130 x 440) (1520x 570)
Side extension 12.1 x 11 12.1 x 11 15.7 x 13.8
L x W - in. (mm) (310 x 280) (310 x 280) (400 x 350)
Saw dimension w/Leg & extension 48.4 x 30.7 x 47.2 56.3 x 30.7 x 47.2 66.9 x 39.4 x 50.8
L x W x H - in. (mm) (1230x780x1200) (1380x780x1200) (1750x1000x1290)
Saw Weight uncrated - lb (kg) 145.5 (66) 154.3 ( 70) 317.2 (144)
Crated weight - lb (kg) 170 (77) 181 (82) 350.5 (159)
3.0 TECHNICAL FEATURES
3.1 T
ECHNICAL DATA
2.4 S
TANDARD
E
QUIPMENT AND
O
PTION
A
CCESSORIES
Standard Equipment:
• Open End 30mm Wrench to change the blade
• Rip Fence
• Side Extension Table
Document equipment:
• Instruction manual
3.2 N
OISE
L
EVEL
Noise produced from the machine on its own is less
than 70dB (A).
General noise level could INCREASE when:
• multiple saws are in the surroundings
• saw is inside of a building
• materials are being cut; some material types produce
more noise than others
• with use of improper acoustic safety devices.
Noise level could DECREASE by:
• reducing the speed rate of cut
• always using blades that are in good condition
• using silent core or Stealth
TM
Blades.
NOTE:
Acoustic pressure over 85 dB (A) could be dangerous
for your hearing health, it is recommended to always
use an approved hearing safety device while operating
the saw.