FELIXrobotics FELIX 3.0 User Manual Download Page 8

Page: 8 / 65

age

[email protected]
www.FELIXprinters.com

User manual FELIX 3.0 3d printer

Software Installation – Microsoft Windows

4.1

Microsoft Windows

NOTE: Mac users should go to chapter 4.2

This chapter describes the steps how to make the printer communicate with your PC.

Repetier-host

Driver installation

Firmware installation

4.1.1

Printer Software – Repetier-Host

Repetier-Host provides the following functions:

Control your printer, move axes and set temperatures, monitoring etc.

Process your CAD files (STL files) and make them printable.

To install Repetier-Host on your PC take the following steps:
1.

Download the latest version of Repetier-Host from

www.FELIXprinters.com/downloads

Navigate to the software folder and download

setupRepetierHostFELIXprinters*.exe

Run the

setupRepetierHostFELIXprinters*.exe

file and follow the installation instructions.

During installation it will ask to install a driver. This is recommended to do.

Make sure the power cable and USB cable of the printer are connected.

Start Repetier-Host.

Go to Config -> Printer settings.

Select your printer type, single or dual head
In the configuration window press the

Refresh Ports

button.

Summary of Contents for FELIX 3.0


































































Search results

Summary of Contents for FELIX 3.0

Reviews:

FELIXrobotics FELIX 3.0, User Manual, Page: 8 / 65

Search results

Summary of Contents for FELIX 3.0

Reviews: