FELIXrobotics FELIX 3.0 User Manual Download Page 65 | Manualshive

Page: 65 / 65

background image

P

age

64

[email protected]
www.FELIXprinters.com

User manual FELIX 3.0 3d printer

FELIXprinters is not responsible for the content of any third-party websites or services, any links contained in third-party
websites or services, or any changes or updates to third-party websites or services. Where FELIXprinters provides links
and/or access to third-party websites and/or services it is only as a convenience to you, and the inclusion of any link or
access does not imply an endorsement by FELIXprinters of the third-party site or service.

15. Third Party Rights

Third parties have no rights under applicable legislation in relation to the rights of third parties to rely upon or to enforce
any term of these Terms and Conditions but that does not affect any right or remedy of a third party which exists or is
available apart from such applicable legislation.

16. Survival

Any provisions in these Terms and Conditions which by their nature extend beyond the termination or expiration of any
sale or license of the Products will remain in effect.

17. Severability

If any provision of these Terms and Conditions is deemed to be void, invalid, unenforceable or illegal, the other provisions
shall continue in full force and effect. You and FELIXprinters are deemed to have agreed to new terms and conditions in
substitution for such invalid provisions. These new terms and conditions shall be interpreted, as regards their contents
and effect, as closely as possible to the original text as written but in such a way that rights can indeed be derived from
them.

18. Governing law

These Terms and Conditions and any disputes related to these Terms and Conditions or to the purchase and use of the
Products or otherwise are subject to the laws of The Netherlands. The United Nations Convention on Contracts for the
International Sales of Goods is hereby excluded from application to these Terms and Conditions. All disputes arising out
of these Terms and Conditions shall be settled by courts venued in Amsterdam, which will have exclusive jurisdiction in
respect of any such disputes.

19. Translations

This English version of these Terms and Conditions is the version that governs your purchase, of Products from
FELIXprinters if you are located in the Unites States of America. Should you have any questions, suggestions or
complaints concerning your order, your purchase, these Terms and Conditions, or if you desire to contact FELIXprinters

for any reason, please do so by email by visiting FELIXprinters’s website.

«
...
63
64
65

Summary of Contents for FELIX 3.0


































































Reviews:

No comments

Related manuals for FELIX 3.0

Brand: Samsung Pages: 341

CLP-770ND - Color Laser Printer

Brand: Samsung Pages: 2

CLP 610ND - Color Laser Printer

Brand: Samsung Pages: 114

Brand: Samsung Pages: 6

Brand: Samsung Pages: 15

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 227

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 118

CLP 300N - Network-ready Color Laser Printer

Brand: Samsung Pages: 94

3561ND - B/W Laser Printer

Brand: Samsung Pages: 252

3561ND - B/W Laser Printer

Brand: Samsung Pages: 127

2252W - Printer - B/W

Brand: Samsung Pages: 201

ML 2851ND - B/W Laser Printer

Brand: Samsung Pages: 89

Brand: Xerox Pages: 414

Brand: JICCODA Pages: 46

Brand: Samsung Pages: 115

da Vinci 1.0 Pro

Brand: XYZ Printing Pages: 11

Brand: Canon Pages: 394

Brand: Xiamen Hanin Electronic Technology Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands