P
age
42
[email protected]
www.FELIXprinters.com
User manual FELIX 3.0 3d printer
8.4
Menu description
This section describes the existing menu’s in more detail.
Top Menu
By scrolling through the top menu with the knob, you will get several views.
The top menu
Line 1, describes the temperatures of the hot-ends in this format
T (actual)/(desired)
Line 2, describes the bed temperature
Line 3, Feed: …%, is the printing speed override. By changing the
feed rate you can override the current
printing speed and finish your prints more quickly, but paying a penalty in print quality.
Flow …%: This alters the amount of filament extruded compared to the calculated values.
Line 4, Status information.
Main menu
Quick Settings: Links to submenu with often used settings
Print File: If an SD card is present, you can select and print it. Make sure the temperatures of the hot-ends and
bed are at the desired values already.
Position: Change the positions of the axes.
Extruder: Move and control the extruder
Fan speed: Change the fan speed of the fan blowing cool air on the bottom of the hot-ends
SD Card: If an SD card is present you can print or delete a file from the SDcard.
Debugging: Here you can change debugging settings. Only for expert use.
Configuration: Change the configuration of the printer. Only use this if you know what you are doing,
changing settings here can seriously damage the printer.
