www.felixprinters.com
Page
17
of
65
File a flat side to the motor and mount the bronze piece onto the motor.
The distance of the motor_face to the bottom of the insert_piece should be
approx. 1mm. The top motor axle which comes above the bronze
insert_piece should ideally not be filed.
Mount the motor with insertpiece onto the extru_base_pt2 with 4 m3x8
countersunk bolts. IMPORTANT: the orientation of the motor should be
the same as on the picture.
Take the extru airduct and make the surface flat with a file. Careful,
because it’s a delicate part.
Take the base part and level the surface as indicated on the picture. This
will ensure that the fan will lay flat when mounted on the surface.
