WWW.FEIT.COM
5
OneSync Remote Operation
1
Remote Control Button Configurations
□
LED Indicator Light:
LED indicator light will flash when a
button is pressed to signify that the battery is still charged.
□
On / Off:
Press this button to turn all connected lights on & off.
□
Brightness Level:
Press the left and right sides of the
dimming button to adjust the brightness.
□
Selectable White Color Cycle:
Press this button to rotate
through Soft White (2700K), Bright White (3000K), Cool
White (4000K), Daylight (5000K) and Deluxe Daylight (6500K).
□
Color Cycle:
Press this button to rotate through Red, Blue,
Green, Yellow, Orange, Purple, Teal and Pink.
□
Select Group:
Press the group number before pressing
function buttons to control the lights paired to the specific group.
□
Daily Timer:
Press the timer button to set how long the
connected lights will remain on. Solar items will turn On
automatically at dusk and turn off after the set amount of time.
Non-solar powered devices will turn On every day at the exact
time the timer was set. Press and hold the 8hr button for 5
seconds to reset timer back to 6hrs (default). For non-solar
powered devices, the timer will be deactivated.
On/Off
Select Group
Colors Cycle
Brightness
Level
Selectable
White Color
Cycle
Set Daily Timer
Accessing the Batteries
□
Slide the battery cover off of the back of the remote control (AA)
to expose the battery compartment and install or replace the AAA batteries.
1
Battery Installation/Replacement
Remove the back
cover to replace the batteries.
Follow the correct polarity.
Remote only uses
AAA batteries.
(AA)
(FF)
1
2
3
4
5
6
2hr
4hr
8hr
Timer
Reset
Groups
LOW
HIGH
RGB
The OneSync remote has a 100ft control range and will command all paired fixtures within 100ft of the remote.
All OneSync fixtures are equipped with a signal repeater that will repeat any remote commands to all other fixtures within 100ft. Placing
fixtures within 100ft of at least one other fixture creates a control network and allows for unlimited remote control range, as long as there is a
functioning OneSync fixture within 100ft to relay the command.
Example:
You can install a OneSync fixture, then another OneSync fixture 100ft away from the first unit. Continue to install 3 more OneSync
fixtures in this way so that the last fixture is 500ft away. Using this relay technology, the remote will control the farthest fixture that is 500ft away.
+
-
+
-
