NOTE:
The smart bridge must first be setup and connected to a phone or smart device before transferring.
RGB
AA
Selectable
White Color
Cycle
How to Transfer Groups from Smart Bridge to Remote
1
Transferring a specific group from the smart bridge to the remote using the Feit app.
□
In the Feit app, select a group number and press Transfer Group. Smart bridge will enter transfer mode for 30 seconds.
□
On the remote (AA), press and hold the RGB button for five seconds.
□
The fixtures in the existing group will blink once to indicate successful transfer.
□
Remote will now be able to control the fixtures under the group that has been transferred.
If you have a smart bridge with a preexisting pairing to OneSync lights, you can easily transfer these groups to a new remote.
1
2
3
4
5
6
2hr
4hr
8hr
Timer
Reset
Groups
LOW
HIGH
RGB
AA
1
2
3
4
5
6
2hr
4hr
8hr
Timer
Reset
Groups
LOW
HIGH
RGB
WWW.FEIT.COM
8
How to Delete Groups between Remote and Smart Bridge
1
a
Unpairing the smart bridge from the remote.
□
On the smart bridge, push the pairing button five times to activate unpairing mode. The LED indicator will start blinking and
smart bridge will be in unpairing mode for 30 seconds.
□
On the remote (AA), press and hold the power button for five seconds.
□
The LED indicator will stop blinking once the remote and smart bridge have unpaired successfully.
□
The remote and the smart bridge will work independently.
1
b
Deleting transferred groups.
□
Press the Transfer button in the Feit app.
□
On the remote, press and hold the Selectable White Color Cycle button for five seconds.
