18
WSG 8-115 / WSG 13-125 / WSG 9-125 / WSG 13-125 S
WSG 13-150 / WSG 9-70 E / WSG 13-70 E
EN
For your safety.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual and the
enclosed “General Safety Instructions” (docu-
ment number 3 41 30 054 06 1), including the
figures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Please also observe the relevant national indus-
trial safety regulations (e. g. in Germany:
BGV A3, BGR 500).
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
This Instruction Manual and the enclosed “Gen-
eral Safety Instructions” should be kept for later
use and enclosed with the power tool, should it
be passed on or sold.
Special safety instructions.
Operations such as sanding or polishing are not
recommended to be performed with this power
tool.
Operations for which the power tool was
not designed may create a hazard and cause per-
sonal injury.
Do not rivet or screw any name-plates or signs
onto the power tool.
If the insulation is damaged,
protection against an electric shock will be inef-
fective. Adhesive labels are recommended.
Wear personal protective equipment. Depending
on the application, use face shield, safety goggles
or safety glasses. As appropriate, wear dust mask,
ear protection, gloves and shop apron capable of
protecting you against flying debris from the
accessory or work piece.
The eye protection
must be capable of protecting against flying par-
ticles generated by the various different opera-
tions. The dust mask or respirator must be
capable of filtering particles generated by your
operation. Prolonged exposure to high intensity
noise may cause loss of hearing.
CAUTION
This sign warns of a possible dangerous situation
that could cause injury.
It is forbidden to dispose of
the product in the unsorted
household waste.
Worn out power tools and other electrotechnical
and electrical products should be sorted sepa-
rately for environment-friendly recycling.
Protective class II
Product with double or reinforced insulation
mm
Millimeter
Unit of measure for length, width, height or depth
kgKilog
ram
Unit of measure for the mass
V
Volt
Unit of measure for the electric voltage
A
Ampere
Unit of measure for the electric current intensity
Hz
Cycles per second
Unit of measure for the frequency
W
Watt
Unit of measure for the output
min
Minutes
Unit of measure for the time
~ or a. c.
Current type
Alternating current
or d. c.
Current type
Direct current
1 ~
Power supply type
Alternating current single-phase
n
o
No-load speed
Revolution speed at no-load
1/min
per minute
Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
Ø
Diameter
Diameter of a round part
Symbol
Term, meaning
Explanation
3 41 01 050 06 0.book Seite 18 Dienstag, 12. Juni 2007 10:57 10
