FEIN
– REPAIR - TOOLS
All rights reserved by FEIN, especially in case of industrial rights registration.
Any power of disposition such as copying and right of transfer is situated with FEIN.
Sahre / MVK 05 / 2011
4.5. Disassembly
– Drill jig / Guide
The disassembling of the gear box on a KBM 80 is very complex, therefore the guide can be replaced
without disassembling of the gear box too.
The way to do it you will see on the following pages.
Loosen the two screws on the guide and take it off.
Move the guide up and take it out of the drill jig.
Take off the gear rod.
Loosen the screws on the gliding bars and take it out together with the pressure bar.
Tools:
- allen key 5mm
