FEIN
– REPAIR - TOOLS
All rights reserved by FEIN, especially in case of industrial rights registration.
Any power of disposition such as copying and right of transfer is situated with FEIN.
Sahre / MVK 05 / 2011
4.3. Disassembly - Drill motor
Remove spacer (if necessary) from ball bearing with circlip pliers
Carefully press out magnet ring (risk of breakage)
Remove bearing and replace if necessary
Remove 2 screws from field coil
Remove plug connection (brown cable) from carbon holder
Remove contact plug (white) from holder and slowly pull out of motor
housing with field coil (to do this, all cables must be routed between the ribs
of the housing)
Tools:
- outer circlip plier