KBM 50Q; JCM 200QX
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
C-SC_CSSM
2013.02
66/79
Version 1.0
1. Insert stator (1) in motor housing.
Insert stator such that the two connecting cables (2) are on the right as shown.
Press stator in to motor housing until stop is reached.
2. Lead stator's connecting cables on the right upwards (when looking at type plate).
3. Thread blue connecting cable in to recess (2).
4. Use screw (3) to fit one brush holder (4) on each side.
5. Insert air guide ring (5) and screw down.
7. Assembly
Assembling stator
Tool:
- Torx T20
2
5
1
4
3
2
