Fein GRIT GHB 15-50, Manual

Page: 14 / 176

14
en
Declaration of conformity.
This CE declaration is only valid for European Union
and EFTA (European Free Trade Association) countries
and only for products intended for the EU- or EFTA
market. After placing the product on the EU market the
UKCA mark loses its mark validity.
The
UKCA declaration is only valid for the Great
Britain market (England, Wales and Scotland) and only
for products intended for the Great Britain market.
After placing the product on the Great Britain market
the CE mark loses its mark validity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out power tools and accessories
should be sorted for environmental-friendly recycling.
Due to their ingredients and properties, grinding belts
must generally be disposed of properly as hazardous
waste in accordance with regional disposal regulations.
Selection of accessories
Use only original FEIN accessories. The accessories
must be intended for the power tool type.
– Grinding belt/fleece belt ISO 2976 — 50 x
1000 mm, max. belt thickness 5 mm
– Grinding belt 50 x 1150 mm, max. belt thickness
5 mm (only for GHBR)
– GHBD module
– GHBM module
– GHBR module (for use only with GHB 15-50 Inox)