BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
C-SC_CSSM
Version 1.0
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
35
of
65
Fitting the motor housing
1. Put the carbon bush holder (1) in place and use the screw (2) to fasten it [0.6 Nm +0.1 Nm].
2. Connect the cable (3) to the stator.
3. Insert the cables (4) into the stator.
4. Slide the stator (5) into the correct position in the motor housing (6).
Tools:
- PH2 cross-head
screwdriver
3
1
2
4
6
5
