BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
C-SC_CSSM
Version 1.0
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
54
of
65
Fitting the gearbox housing [applies to: BOP 13-2 (A)]
1. Press on the grooved ball bearing (1).
2. Fit the circlip (2).
Replace the circlip during each fitting.
3. Place the disc (3) in the correct position.
Its flat side should be facing the grooved ball bearing.
Tools:
- Circlip pliers
- Arbor press
- Sleeve
12 mm inner diameter
15 mm outer diameter
1
2
3
