20
en
Securing the workpiece (figure 10).
Secure the workpiece sufficiently.
An
inadequately secured workpiece can, for
example, cause the grinding accessory to
jam. This can lead to kickback, cause the
workpiece to fall down, and lead to
other dangerous situations.
Shank length (figure 11).
Observe the maximum permitted pro-
jecting shaft length (a) of the grinding
accessory according to the manufac-
turer's instructions.
Cutting (figure 12).
Always work in an up-grinding motion,
so that the cutting disc will not jump out
of the cut.
Fig. 10
Fig. 11
a
Fig. 12
OBJ_BUCH-0000000289-001.book Page 20 Wednesday, November 22, 2017 8:24 AM
