M46 Semiconductor Inspection Microscope Assembly
6
Fein
Install the objective lenses by first
turning the coarse focus knob to bring
the stage into the lowest position. Install
the objective into the nosepiece from
low magnification to high magnification
in the direction shown in the image to
the right.
Assemble the microscope head by
loosening the set screw (1), then position
the microscope head into the dovetail on
the illumination arm ensuring the eyepieces
are facing forward. Secure the head in place
with the set screw (1).
Low
High
Remove the eyepiece tube covers (1) and
insert the eyepieces (2) into the eyetubes
until the bottom of the eyepieces is
touching the lip of the eyetubes.
Set the stage insert by loosening the set
screws (1). Position the stage insert (2) with
the larger beveled edge upwards. Position
so hole (3) and hole (4) are superimposed.
Secure in place with set screws (1).
1
1
2
1
3
2
4