M46 Semiconductor Inspection Microscope Assembly
4
Fein
Use the Allen key to loosen the screws
(1) and remove the lamp house cover.
Before replacing or installing the bulb,
make sure power is cut off to the
microscope and the bulb and bulb
base are cool to the touch.
Open the bulb lock piece (2) and
remove the bulb (3) with clean a soft
tissue. Insert the bulb pins (4) into the
jack on the bulb holder (5). The bulb
should be vertical after assembly.
Loosen the bulb lock piece (2), the
bulb will be locked into place. Replace
the lamp house cover and secure with
screw.
**Do NOT touch the bulb with fingers.
If fingerprints are left on the bulb,
clean with a soft cloth.
Only replace bulb with Fein Optic
12V/100W Halogen bulb.
5
1
2
4
3
Assemble and Replace the Halogen Bulb