OBID
i-scan
®
HF
Installation
ID ISC.M02
FEIG ELECTRONIC GmbH
Page 24 of 27
M20301-4e-ID-B.doc
4.3.1 USA (FCC) approved antennas
This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by FCC to operate with the antenna types listed below with maximum permis-
sion gain and required antenna impedance for each antenna type indicated. Antenna types, not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device
Following antennas are approved by FCC according FCC Part 15 and IC Canada according
RS210
•
Internal antenna (magnetic antenna)
•
ID ISC.ANT100100 (magnetic antenna)
•
ID ISC.ANT4030 (magnetic antenna)
4.3.2 Canada (IC) approved antennas
This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with maxi-
mum permission gain and required antenna impedance for each antenna type indicated. Antenna
types, not included in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de
modèle s’il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonc-
tionner avec les types d’antenne ’énoncé ci-dessus et ayant un gain admissible maximal et
l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste,
ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation
de l’émetteur
Following antennas are approved by IC Canada according RS210
•
Internal antenna (magnetic antenna)
