Feig Electronic OBID i-scan ID ISC.LRM2500-A, Installation Manual

Page: 23 / 30

OBID i- scan
®
HF Installation ID ISC.LRM2500-A
FEIG ELECTRONIC GmbH Page 23 of 30 M10210-4e-ID-B.docx
3.11.3 USB
– Interface X4 (Host Communication, HID)
The USB socket on the board is terminal X4. The pinout is standardized. The data rate is reduced
to 12 Mbit (USB full speed). A standard USB-cable can be used.
Note:
The length of the USB-cable can be a max. of 5m (20 inch). It is not allowed to use longer
cables.
3.11.4 USB
– Host X5
The USB host socket on the board is terminal X5. The pinout is standardized. The data rate is re-
duced to 12 Mbit (USB full speed). It can be used for a standard WLAN-USB-Stick
Figure 23: USB-Host Interface for WLAN Stick
Notes:

The following table gives an overview about successfully tested Wireless LAN Sticks
Manufacturer Description Model
Buffalo Wireless-N NFiniti High Power WLI-UC-G300HP
Buffalo Wireless
–N NFiniti
WLI-UC-G300N
Cisco / Linksys Wireless Network USB Adapter WUSB100
Netgear Wireless-G 54 USB Adapter WG111 v3
Table 13: Successfully tested WLAN Sticks.
X5
X4
Figure 22: USB-Interface for host communication