IDENTIFICATION
4 Charging the Battery
Page 8 of 8
Pos : 16 /ID P/M anuals/Ü bersc hrift en/1/Charging t he Bat ter y @ 3\ mod_1542017653651_10021. doc x @ 55667 @ 1 @ 1
4 Charging the Battery
Charging the Battery
Pos : 17 /ID P/M anuals/PANMO BI L/C harging the Batt er y @ 3\ mod_1542018436163_10021. doc x @ 55907 @ @ 1
Before the first operation, the main battery should be fully charged by using the included power adapter or
through the USB interface of a computer. As long as the battery is charging the red LED (3) will light solid
red. After the battery is fully charged the red LED (3) turns off. A full recharge of the battery takes approx. 4
to 5 hours when using the included power adapter. Recharging the battery via USB may take longer.
To charge the battery via USB follow the instructions below:
1. Remove the USB protection clip (9) from the device.
2. Connect the device to the USB port of a computer or to the USB power adapter (accessories).
3. As long as the battery is charging, the red LED (3) lights solid red.
4. After the battery is fully charged the red LED (3) turns off.
Pos : 18 /Steuermodul e/------------ Seit enumbruc h ------------ @ 0\ mod_1452083281983_0. doc x @ 10032 @ @ 1