IDENTIFICATION
2 Reset
Page 7 of 7
Pos : 11 /ID P/M anuals/Ü bersc hrift en/1/Reset @ 3\mod_1542030229425_10021.doc x @ 56199 @ 1 @ 1
2 Reset
Reset
Pos : 12 /ID P/M anuals/PANMO BI L/R es et @ 3\ mod_1542016708957_10021. doc x @ 55649 @ @ 1
To reset the ID PM ECCO+ press and hold the keys 1, 2, 3 and 4 for 5 seconds.
NOTE:
•
By reset the device loses its timestamp. Before continuing to use it you must synchronize the
time settings by connecting the ID PM ECCO+ with the Master Setup. The time thereby will be
automatically synchronized with the system time of your PC.
•
Specific configuration settings and data will not be lost by the reset.
Pos : 13 /ID P/M anuals/Ü bersc hrift en/1/Configur ati on Mode @ 3\mod_1542016638737_10021.doc x @ 55639 @ 1 @ 1
3 Configuration Mode
Configuration Mode
Pos : 14 /ID P/M anuals/PANMO BI L/C onfiguration M ode @ 3\ mod_1542016988448_10021. doc x @ 55658 @ @ 1
To set the alternative configuration mode follow the steps below:
1. Switch off the device.
2. Press and hold keys 4 and 5 until a beep sound appears (this may take a few seconds).
3. Connect the ID PM ECCO+ to a computer via USB.
4. The device will be mounted as a removable drive “SCANNDY”.
5. Open the file “config.ini” or use the Universal Configurator to modify the settings.
6. Press button 3 (trigger) until a beep sound appears.
7. The device restarts with the new settings.
Pos : 15 /Steuermodul e/------------ Seit enumbruc h ------------ @ 0\ mod_1452083281983_0. doc x @ 10032 @ @ 1
