IDENTIFICATION
1 Introduction
Page 5 of 5
Pos : 8 / IDP/M anuals/Ü berschrif ten/ 1/I ntr oduc tion @ 0\ mod_1526993216125_10021. doc x @ 15697 @ 1 @ 1
1 Introduction
Introduction
Pos : 9 / IDP/M anuals/ Introduc tion/I ntr oduc tion ECCO+ @ 3\ mod_1542013202968_10021. doc x @ 55611 @ @ 1
The ID PM ECCO+ captures and stores barcodes and RFID data for a variety of uses and transmits those to
a host via USB connection, Bluetooth or WiFi. This document provides a basic instruction for using the ID
PM ECCO+ device.
Fig. 1: ID PM ECCO+ device overview
Label
Description
Function
1
Green LED
Lights up green when ECCO+ is turned ON.
When the battery level is empty, it flashes every 2 sec.
(Further function can be user defined with the programming interface)
2
Yellow LED
Lights up yellow if a barcode or RFID tag was read successfully.
Is flashing yellow (500ms) when connected to USB.
(Further function can be user defined with the programming interface)
3
Red LED
Lights up red if connected to a battery charger (USB or power adapter).
Red = Battery charging
Off = Battery fully charged
4
Blue LED
Lights up blue when ECCO+ is connected to Bluetooth.
Is flashing fast (500ms) while Wi-Fi is associated.
Is flashing blue (3 sec.) when Wi-Fi is connected.
(Further function can be user defined with the programming interface)
5
Key 1 (trigger button)
Triggers the barcode and/or the RFID reader.
(Further function can be user defined by Master Setup or with the
programming interface)
6
Key 2 (custom)
(This function can be configured by using Master Setup or with the
