IDENTIFICATION
Installation
ID ISC.LRU1002
FEIG ELECTRONIC GmbH
Page 26 of 32
M61110-2e-ID-B.docx
6. Technical Data
MECHANICAL DATA
Housing
Aluminum powder-coated
Dimension (W x H x D)
260 mm x 157 mm x 68 mm
10.2 inch x 6.2 inch x 2.7 inch
Weight
1,8 kg (4.0 lb)
Protection Class
IP 43 (with protection cap IP64)
Colour
RAL 9003 (Signal White)
ELECTRICAL DATA
Power Supply
24 V DC ± 20 % (Noise Ripple: max. 150 mV)
Current Consumption
max. 3,8 A
typ.*
1,0 A
*
without the power consumption of an external connected
device, like a UHF
–Multiplexer
Operating Frequency
EU-Reader
FCC-Reader
865 MHz to 868 MHz (EN 302 208)
902 MHz to 928 MHz (FCC47 Part15)
RF-Power
100 mW up to max. 2 W configurable
(Tolerance: max. ±3 dB)
Antenna Connection
4 x SMA female (50
), internal Multiplexer,
configurable with 24 V DC
/ max. 500 mA
on the antenna output
RF-Diagnostic
RF-Channel monitoring
Antenna SWR-monitoring
Internal Overheating control*
Outputs
2 x Optocoupler
2 x Relay (NOC)
24 V DC
/ 20 mA (galvanically isolated)
24 V DC
/ 1 A (switching current), (2A con-
stant load)
Inputs
2 x Optocoupler
max.24 V DC
/ 20 mA
* Caution: Overheating of the device may result in performance losses. It is recommended to activate the RF of the
reader only if there is a transponder in the detection range of an antenna.
