IDENTIFICATION
Installation
Wiegand Switch
FEIG ELECTRONIC GmbH
Page 6 of 18
M80211-0e-ID-B.docx
3. Characterization ID ISC.LR.WS-A
The Wiegand Switch is an additional interface device which allows you to route the Wiegand signal
of a FEIG RFID reader to two different input channels of an access control panel.
Switching between the output channels of the Wiegand Switch is controlled by the readers relay.
The readers relay is switched on or off in dependency of a read event on a particular antenna.
This offers the possibility to control two neighboring gates e.g. in a vehicle access control applica-
tion with just one reader. This can either be an entry and an exit, two entry lanes or two exit lanes.
Multiple antennas can be used per lane.
Figure 1: Examples for control of two lanes with one reader ID ISC.LRU1002 (V2)
The Wiegand Switch can be also used if the Wiegand signal quality of other reader types is not
sufficient for the connected Access Control Panel.
