IDENTIFICATION
Installation
Wiegand Switch
FEIG ELECTRONIC GmbH
Page 13 of 18
M80211-0e-ID-B.docx
6.3. Wiegand Outputs D0, D1 (5V TTL)
The input signals of the external access controller are connected to connector X3 and X4 of the
Wiegand Switch.
Figure 7: Pin Assignment at connector X3 and X4
Table 6: Pin assignment at connector X2
Pin
Signal
X3-A D0
D0 at Input 1 of the Access Controller (5V TTL)
X3-A D1
D1 at Input 1 of the Access Controller (5V TTL)
X3-GND
Common Ground
X4-B D0
D0 at Input 2 of the Access Controller (5V TTL)
X4-B D1
D1 at Input 2 of the Access Controller (5V TTL)
X4-GND
Common Ground
X4
X3
