ENGLISH (Original instructions)
Overheat protection
When the tool is overheated, the tool automatically stops and the capacity indicator lamp will blink as illustrated. In this
situation, let the tool cool down before turning the tool on again.
Capacity indictor status
Status
Overheated
Overdischarge protection
When the battery capacity becomes low, the tool stops automatically. If the product does not operate even when the
switches are operated, remove the batteries from the tool and charge the batteries.
The remaining battery capacity is shown while you are pressing the check button. The capacity indicators correspond
to each battery.(The indicator on the left corresponds to the usage of the battery pack on the left)
Capacity indicator status
Reminding
battery
capacity
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
On
Off
Blinking
Indicating the remaining battery capacity
1.Button
2.Battery cartridge
On
Off
Blinking
11
