Feider Machines FG2000i-B, User Manual

Page: 22 / 27

2) Turn the engine switch to
“ON” position, and loosen the carburetor drain screw to discharge
gasoline inside of the suitable containers.
3) Take off the Spark Plug cap, pull the Starter handle three or four times, discharge the gasoline
from the fuel pipe and carburetor.
4) Turn the engine switch to
“O” position, and tighten the drain screw of carburetor.
5) Re-install the Spark Plug cap.
9.3 Change the engine oil
9.4 Remove the Spark Plug, and fill 10-20ml engine oil into the cylinder. Crank the engine several
times to distribute the oil, and Re-install the Spark Plug.
9.5 Pull the Starter handle slowly till resistance is felt. At this point, the piston is coming up on its
compression stroke and both the intake and exhaust valves are closed. In this position, it helps
to protect the engine from internal corrosion.