Feider Machines FC200L, Instruction Manual

Page: 10 / 16

8

Replace the oil filter.

Fit the air filter.

Install the compressor in a dry, clean, dust-free, well-ventilated
area, which will allow the compressor to work better and have a
longer life.

Install the compressor in a sufficiently bright place, easy to fill the
oil.

Install the compressor in a place with flat ground to ensure the
stability of the compressor during operation.

Keep a 50-80cm wide passage around the compressor for good
ventilation and easy handling and maintenance of the machine.
VII. Adjustment and use
Warning ! indoor use only
1. The place of use of the compressor must be clean, dry and ventilated.
2. Conditions of use: Use the compressor only at a temperature between 0 and 35 ° C.
3. Be sure to use a voltage ± 5% of the recommended voltage.
4. Maintain the oil level at the red circle filler cap.
5. Use SAE30 or L-DAB100 compressor oil above 10 ° C, and SAE10 or L-DAB68 below
10 ° C.
6. Open the outlet valve, set the pressure switch to ON (Fig. 3), run the compressor idle
for 10 minutes to properly lubricate the moving parts before normal use.
(Fig.3)
1. The compressor is controlled by a pressure switch during normal operation.
It stops automatically when the pressure reaches its maximum level or restarts
automatically when the pressure drops to its minimum level. The maximum