29
Default Setting of Uniclr:
K
：
1
‐
2
=
‐
9
；
C
：
1
‐
2
=
‐
9
；
M
：
1
‐
2
=
‐
9
；
Y
：
1
‐
2
=
‐
9
；
Lc
：
1
‐
2=
‐
9
；
Lm
：
1
‐
2=
‐
9
Please click the “Save Parameters” after inputing values, then print the adjusting
picture of the same color again. If the adjustment still is not good, need to fine tune
the physical alignment. After 180dpi is aligned, click the auto adjust to get the
parameter for other dpi.
Reset Parameters:
While confused with setup of more parameters, please click “Reset Parameters” to
recover the last saved parameters.
2.5 H Align: It will be adjusted well by printing the different colors dots at the same
position.
“H Align” shortcut key is shown in the following:
The diagram of “H Align” is shown in the following:
Note: K is the reference. At the “0” point, other color should overlapped on K. If not,
look for the rectangle which is overlapped, and input the corresponding value into the
“Head Adjustment”
.
Example:
The C line and K line are overlapped well at“-1”, modify the value in the software:
Chapter
4
Basic
Operation
0
‐
1
‐
2
‐
3
3
2
1
