FEI BAO Mirage 2000
Apr 14
7
Remove the servo cover for the
elevon and with the mounting
hardware supplied fit your servo.
Given the size of this control
surface it is important that a
premium quality, high torque
servo is used.
Fit the control rod between the
servo and the elevon and ensure
adequate movement of the surface.
It is very important to ensure that
there is no free play in the linkage
system as this may induce flutter
and the loss of control. Ensure all
lock nuts are secured.
A slot has been cut into the elevon for the
control horn, fit the horn using hysol.
(Note - the photo shows two horns fitted
but only one is required and supplied).
