FEI BAO Mirage 2000
Apr 14
15
The supplied thrust tube should be
good for turbines up to 16 Kg thrust
but may deform if larger engines are
used.
In this build an 18 Kg thrust turbine
was used so a larger thrust tube was
purchased separately. For this set up
the bypass was not used. (larger
thrust tube shown)
Turbine Controls
To accommodate the turbine controls for this build we fabricated a tray to mount
above the inlet ducts.
This allowed the electronics to be better spaced, as there is limited space available.
Air System Valves
The front mounting tray wa
valves. There are m
requireme
valves which you will n
valve.
All air lines were routed
plastic then up through the mounting tray to the air
valves. This way the airlines are contained and out of
the way. Ensure you leave enough slack in the air lines
ove this tray if required.
s used to house the air
echanical valves supplied with the
kit which are adequate to undertake the air system
nts. In this build we chose to use electronic
eed 3 x 2 way valves and a brake
under the mounting tray in
to rem
