FeelElec
36
FY8300 Series User
’
s Manual
System Configuration and Auxiliary Functions
Press
SYS
button of front panel to enter System interface. The interface
displays the instrument parameter storage [SAVE] , parameter loading [LOAD] ,
configuration [CONF] and other functional [MORE] information.
SAVE: To save current parameters of waveform to save positions (12 sets).
LOAD: To load parameters to current working status from save positions.
SYNC
：
The waveform parameters of configurable channels 2 and 3 change
synchronously with the corresponding parameters of channel 1.
CONF: To set system language, turn on/off Buzzer and Uplink mode.
MORE: To set default output status of three channels.
CH1 BOOT
：
ON
The default CH1 channel is on to turn on the output state
，
can press the [ F1 ]
button to set the default output status of the CH1 channel.
CH2 BOOT: ON
The default CH2 channel is on to turn on the output state
，
can press the [ F2 ]
button to set the default output status of the CH2 channel.
CH3 BOOT: ON
The default CH3 channel is on to turn on the output state
，
can press the [ F3 ]
button to set the default output status of the CH3 channel.
FACTORY DEFAULTS:OFF
According to user's requirement, factory settings can be restored by pressing
F3 key and
OK
key.
