FeelElec
14
FY8300 Series User
’
s Manual
5
Frequency
Display frequency value of current channel. Press
FREQ
button to highlight it and use ADJ Knob and Arrows to change
the value.
6
Amplitude
Display amplitude value of current channel. Press
AMPL
button to highlight it and use ADJ Knob and Arrows to change
the value.
7
Offset
Display DC Offset value of current channel. Press
OFFS
button to highlight it and use ADJ Knob and Arrows to change
the value.
8
Phase
Display Phase value of current channel. Press
PHAS
to
highlight it and use ADJ Knob and Arrows to change the
value.
9
Waveform
Display diagram of current waveform
（
Including Arbitrary
）
.
Yellow indicates CH1 and blue indicates CH2 and Violet
indicates CH3.
The amplitude, offset and phase information of the output
signals of CH1, CH2 and CH3 channels will be reflected in the
waveform display window. The waveform amplitude displayed
in the window will automatically switch gears according to the
actual amplitude of the three channels.
10
Duty Cycle
Display Duty Cycle value of current channel. Press
DUTY
button to highlight it and use ADJ Knob and Arrows to change
the value.
Note: Duty cycle parameters are only valid for rectangular
wave, trapezoidal wave and CMOS wave.
11
RISE EDGE.
Show the rising edge time of the currently selected channel
waveform. Repeatedly press the up button, the menu bar will
switch in the duty/up/down function. When the "up" display
value is highlighted, the parameter will be changed by the
direction key and knob.
Note: Rising edge parameters are only valid for trapezoidal
waves.
12
DESCENDING EDGE.
Show the time of the current selected channel waveform drop
