10
11
- Carefully remove the beard hair from the internal and external
sides of blades with the help of the brush from the set.
- Open the trimmer and clean it, then close it up to the lock clicking
(Picture 3.5) .
- Place the protecting cover to the blades head before keeping.
Head complete dismantling, blades replacement
Head complete dismantling is required for blades replacement or
thorough cleaning, including under water stream.
- Press blades head fixation button (Picture 3.1), the blades head
with the blades will move from the case (Picture 3.2). Blades head
can be disconnected from the case, for that purpose with Your free
hand disconnect it together with the rotating joint from the case
towards opening direction (Picture 3.3).
- You can wash the disconnected head together with blades under
the tap water steam. Before installation, it is necessary to dry the
head with the blades thoroughly.
- Install the head rotary joint lock into the hole in the shaver’s case
and fix it by slightly pressing it until click (Picture 3.4).
- Close the installed head on the case until the lock clicks (Picture
3.5).
To replace blades
- Turn the blades support lock located in the center of head counter-
clockwise (Picture 4.1). The blades support will be released and the
access to the blades will be opened (Picture 4.2).
Attention!
If it is necessary to dismantle the blades head for
replacement of complete cleaning, do not swap the shaving foils
and moving blades from different pairs. Moving blades are grind to
shaving foils, upon changing their places the shaving efficiency will
decrease.
After replacement assemble the head in reverse sequence.
Storage
- Clean the blades and charge the battery before storage.
-Keep the appliance in cool dry place, away from children and
persons with reduced mental or physical abilities.
- Storage temperature 0 -+40°C
Environmental protection
Old appliances contain valuable materials that can be recycled.
Please arrange for the proper recycling of old appliances. Please
dispose your old appliances using appropriate collection systems.
Before dispose, discharge the battery completely.
Subject to technical modifications!
Picture
4
4.1
4.2
EN
