23
Installation
Description, Specifications, Installation, and Operation Manual
Federal Signal
www.fedsig.com
structural integrity.
Hollow Block Wall Mounting Guidelines
Table 16 Hollow Block Wall Mounting Materials
Material Description
Purpose
Qty
1/4 in x 2 in Heavy Duty Toggle Bolts Anchor Bolts 4
1. Mark the mounting hole locations on the wall for the cabinet.
2. Install the anchor bolts for the four cabinet corners according to the manufacturer’s
instructions.
3. Mount the cabinet to the wall.
4. Proceed to following section
Wood Stud Wall Mounting Guidelines
Table 17 Wood Stud Wall Mounting Materials
Material Description
Purpose
Qty
1/4 in x 1 in lag bolts
Backboard and cabinet mounting bolts 8
2 ft x 2 ft x 3/4 in B/C or better plywood Mounting backboard
1
Construction adhesive
Mounting backboard attachment
1
1. Locate the wall studs for attaching the mounting backboard to the wall. Attach the
backboard to at least two studs.
2. Mark the wall stud location on the mounting backboard and drill four pilot holes for
the lag bolts.
3. Apply construction adhesive to the back of the mounting backboard.
4. Attach the mounting backboard to the wall with four lag bolts.
5. Locate the mounting position of the cabinet on the mounting backboard.
6. Drill pilot holes for the lag bolts.
7. Mount the cabinet to the mounting backboard.
8. Proceed to the following section.
Metal Stud Wall Mounting Guidelines
Table 18 Metal Stud Wall Mounting Materials
Material Description
Purpose
Qty
1/4 in x 2 in lag bolts
Cabinet mounting bolts
4
2 ft x 2 ft B/C or better plywood
Mounting backboard
1
#14 x 2 in metal stud screws
Backboard mounting
12
Construction adhesive
Backboard mounting
1
1. Locate the wall studs for attaching the Mounting Backboard to the wall.
2. Mark the wall stud location on the mounting backboard and drill pilot holes for the
#14 metal stud screws. Place three screws in each stud evenly spaced apart.