Mode 2 (Tow Mode)
1 - Alternate Double Flash D1, D4, D6, D8, P1, P4, P6,
P8 with D2, D3, D5, D7, P2, P3, P5, P7 with A
Center Out SignalMaster.
2 - Alternate Double Flash D1, D4, D6, D8, P1, P4, P6,
P8 with a Single Flash Of D2, D3, D5, D7, P2,
P3, P5, P7 with A Signalmaster Pattern Of S1, S2,
S7, S8 Alternating with S3, S4, S5, S6.
3 - The Lightbar is split into 4 Quadrants: A, B, C, &
D and are flashed as follows: A, C, B, D, A, C, B,
D…...Each block is Single Flashed at 50ms per
Flash.
4 - Double Quadrant Flash, followed by a full lightbar
Quad Flash, followed by a single Quadrant Flash.
5 - Quad Flash – Wrap-Around Inside to Outside
– Followed by a full lightbar Quad Flash.
6 – Wrap-Around Inside to Outside – 30ms Per Head.
7 - Alternate Full Flash followed by Tow Mode Pattern
2.
8 - Quad Flash – Alternate Quad Flash Each side of
bar.
9 – Wrap-Around Inside to Outside to Inside followed
by a Wig/Wag Alternate Flash followed by a Full
Quad Flash.
10 –Wrap-Around Inside to Outside followed by a Quad
Flash.
Mode 3 (On Scene Mode)
1 - Alternate Double Flash outside pairs with Quad
Flash inside pairs and End Caps.
2 - Quadrant Flash, followed by a Wrap-Around Inside
to Outside, followed by a full lightbar Triple Flash.
3 - Increasing Rate Alternating Flash, followed by a
full lightbar Triple Flash.
4 - Alternate Triple Flash entire bar.
5 – Alternate Double Flash S1, S2, S3, S4, D1, D4, D6,
D8, P1, P4, P6, P8 with S5, S6, S7, S8, D2, D3, D5,
D7, P2, P3, P5, P7.
6 – Alternate Double Flash S1, S3, S5, S7, D1, D4, D6,
D8, P1, P4, P6, P8 with S2, S4, S6, S8, D2, D3, D5,
D7, P2, P3, P5, P7, followed by a Wrap-Around
Inside to Outside.
7 – Double Flash S1, S3, S5, S7, D1, D4, D6, D8, P1,
P4, P6, P8, followed by a Wrap-Around Inside to
Outside, followed by a Double Flash of S2, S4, S6,
S8, D2, D3, D5, D7, P2, P3, P5, P7, followed by a
Wrap-Around Outside to Inside.
8 – Wrap-Around Inside to Outside, followed by an
Alternate Double Flash, followed by a Wrap-
Around Inside to Outside, followed by a full
lightbar Double Flash.
9 - Full Lightbar Quad Flash, followed by a Wrap-
Around Inside to Outside, followed by an Alternate
Double Flash, followed by a Wrap-Around Inside to
Outside.
10 –Alternate Triple Flash entire bar twice, followed
by a Wrap-Around Inside to Outside, followed by
an Alternate Double Flash, followed by a Wrap-
Around Inside to Outside.
Programming is accomplished as follows:
a. Apply 12VDC to the mode input to be
programmed. The bar will flash the current pattern.
b. Momentarily apply 12VDC to the
Program (PINK) wire. The lightbar will stop briefly, then
the entire lightbar LEDs will flash the number of the new
flash pattern. The lightbar will then begin to flash the
newly selected pattern.
c. Repeat step b until the desired pattern is
selected.
d. To program the other modes, apply
12VDC to the desire mode input and repeat steps b and c.
C.
Function Activiation – SignalMaster.
1. SignalMaster Center-Out (Warn)
Applying 12VDC to the SignalMaster Center-
out (BLACK) wire will cause the SignalMaster lights to
illuminate from the Center-out.
2. SignalMaster Left to Right
Applying 12VDC to the SignalMaster Right
(BIEGE) wire will cause the SignalMaster lights to
illuminate from the Left to the Right.
3. SignalMaster Right to Left
Applying 12VDC to the SignalMaster Left
(WHITE) wire will cause the SignalMaster lights to
illuminate from the Right to the Left.
4. SignalMaster Mode Programming
Each of the SignalMaster modes can be
programmed to operate with one of three available flash
patterns. These patterns include: single light chase arrow,
double light chase arrow, and single light solid arrow. Each
of these patterns is available in four speeds for a total of
twelve selectable flash patterns per SignalMaster Function.
Patterns are listed below:
LEFT ARROW: (Default Left Arrow Pattern is 1)
1- Solid Left Arrow – 250mS between flashes
2- Double Left Arrow – 250mS between flashes
– Double Flash at end
3 - Single Left Arrow – 250mS between flashes
– Double Flash at end
4 - Solid Left Arrow – 200mS between flashes
5 - Double Left Arrow – 200mS between flashes
– Double Flash at end
6 - Single Left Arrow – 200mS between flashes
– Double Flash at end
7 - Solid Left Arrow – 150mS between flashes
8 - Double Left Arrow – 150mS between flashes
– Double Flash at end
9 - Single Left Arrow – 150mS between flashes
– Double Flash at end
10 -Solid Left Arrow – 100mS between flashes
11 -Double Left Arrow – 100mS between flashes
– Double Flash at end
12 -Single Left Arrow – 100mS between flashes
– Double Flash at end
-3-
