-4-
G. MAINTENANCE
1.
Overview
Crazing (cracking) of lenses will cause reduced effectiveness of the
light. Do not use cleaning agents (which will cause crazing) such as
strong detergents, solvents, or petroleum products. If crazing of lens
es does occur, reliability of light for emergency signaling purposes
may be reduced until lenses are replaced.
Ordinary cleaning of the plastic lenses can be accomplished by using mild
soap and a soft rag. Should fine scratches or a haze appear on a lens, they can ordinari-
ly be removed with a non-abrasive, high quality, one-step, automotive paste cleaner/wax
and a soft cloth.
2.
Service
The Federal Signal factory will provide technical assistance with any prob-
lems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be
accompanied by a Return Material Authorization. This R.M.A. can be obtained from a
local Distributor or Manufacturer’s Representative.
At this time a brief explanation of the service requested, or the nature of the
malfunction, should be provided.
Address all communications and shipments to:
Federal Signal Corporation
Service Department
2645 Federal Signal Dr.
University Park, IL 60484-3167
Phone: 1-800-433-9132
Fax: 1-800-343-9706
Email: [email protected]
3.
Replacement Parts.
Description
Part No.
Lens Gasket
8012111
Mounting Gasket
8012100 or 8012101
Mounting Screws, #8 x 1-1/2”
7011238-24
Screw Grommet
7065073
Lens, Fluted, Clear
8012075
Clip, Heatsink
8012096
Optional Chrome Bezel w/Gasket
QL97MC
Copyright 2010 Federal Signal Corporation
