5
Q
uadra
F
lare
Warning Lights
• To be an effective warning device, this product produces bright light
that can be hazardous to your eyesight when viewed at a close range.
Do not stare directly into this lighting product at a close range or per
-
manent damage to your eyesight may occur.
• It is important that you fully understand how to safely operate this
warning system before use.
• You should only operate your vehicle and its light/sound system in ac
-
cordance with your department’s Standard Operating Procedures.
• If a selected function does not perform properly or if any of the lamps
remain illuminated when the control is off, disconnect the power con
-
nector from the control unit and contact the nearest service center.
• At the start of your shift, you should ensure that the entire warning
light system and the siren system is securely attached and operating
properly.
• Suction cup mounting is for temporary applications only. The unit
should be removed from the window and stored securely when not in
use. Temperature changes and sunlight can cause suction cups to lose
holding power. Periodically check the unit to be sure the suction cups
have a firm grip on the mounting surface. An improperly secured light
could fall off of the vehicle causing injury and damage.
• Holding power of magnetic mounting systems is dependent upon sur
-
face finish, surface flatness, and thickness of the steel mounting sur
-
face. Therefore, to promote proper magnetic mounting:
✓
Mounting surface and magnets must be kept clean, dry, and free of
foreign particles that prevent good surface contact.
✓
Ensure that mounting surface is flat.
✓
A magnet mounting system should not be used on vehicles with
vinyl tops.
✓
To prevent sliding of light assembly on mounting surface, quick
acceleration and hard stops should be avoided.
Failure to follow these safety instructions and precautions may result
in property damage, serious injury, or death to you, to passengers, and
to others.
RETAIN AND REFER TO THIS MESSAGE
