8
General Description
Informer-IP Wall Mount Series B (Model I-IPW)
• Local and remote volume level controls.
• Informers are addressable Individually, in Groups, or All.
• Requires minimal network bandwidth and uses TCP/IP protocol for security and
reliability.
• Remote supervision of Communications, Audio Output, Alert Function Execution.
• Supports fixed IP, DHCP and Auto-IP.
• Wired Ethernet.
• Works with redundant SmartMsg and Commander network servers for reliable fail-
safe operation with full two-way control, status monitoring and configuration of the
Informer-IP.
Ordering Information
Table 1 Ordering Information
Part Numbers Description
I-IPW
Informer-IP Wall Mount, Series B
Informer-IP requires Federal Signal Commander application software.
There is a programming fee associated with Informer-IPs programmed at the factory.
Contact your local representative for a quotation.
Table 2 Optional Accessories
Part Numbers
Description
I-SMD2-36
Scrolling Message Display (2 x 36 inches)
I-IP-SW
Informer-IP Setup Wizard Software and Cable
PSEV-YM
Yellow Station with Momentary Contact – “EVACUATION”
PSEVSC-YM
Yellow Station with Momentary Contact and Sounder Cover –
“EVACUATION”
PSEM-RM
Red Station with Momentary Contact – “EMERGENCY”
PSEMSC-RM
Red Station with Momentary Contact and Sounder Cover –
“EMERGENCY”
LP1-012*
12 VDC Strobe (can be powered by internal power supply for I-IPW)
*(A) Amber, (B) Blue, (C) Clear, (G) Green or (R) Red (I-IPW only)
The following figure illustrates the scrolling message display.
Figure 1 Informer-IP Scrolling Message Display (optional)
