15
Testing and Training
Description, Specifications, Installation, and Operation Manual
Memory Card Removal and Installation
The microSD card stores voice and tone messages.
To remove the card:
1. Open front panel cover.
2. Find the microSD card.
3. Gently push card into the slot. The card can then be removed.
To install the card:
1. Insert and gently push card until it latches into place.
2. Replace cover and tighten screws.
Testing and Training
After the installation is complete, do the following:
• Test the Informer-IP and all accessories from the control point(s) to ensure it is
operating properly.
• Ensure all users are properly trained to use the system before putting the Informer-IP
into service.
• Verify all tone, voice, and text messages contain the correct content per the
emergency operating plan. Alerts should exceed the ambient sound levels by at least
10 dB to ensure they can be heard.
• Conduct testing on a regular basis per facility safety plans to ensure the equipment
remains in working order and operators remain familiar with the use of the
equipment.
Operations
The following is a picture of the Informer-IP keypad.
Figure 6 Informer-IP Keypad
